High performance low viscosity honing and lapping oil for ferrous metals
OIL UK NEATCUT HN-5 is a high performance honing oil. It is based on high quality, low viscosity base oils with a blend of carefully selected synergistic fatty sulphurised and chlorinated additives which provide excellent high temperature performance.
The nature of the extreme pressure/lubricity package utilised in Neatcut HN-5 ensures prolonged tool life and a superior surface finish on fine tolerance work. In addition, the low viscosity will allow maximum penetration and heat dissipation.
High performance low viscosity honing and lapping oil for all metals
OIL UK NEATCUT HNY-5 has been designed for use in honing operations on all materials and can also be used for general machining of non-ferrous metals. This product is also suitable for use with cast iron and where rapid removal of fine particles to prevent wheel clogging is a particular requirement. Neatcut HNY-5 can also be used for a wide range of applications including lapping and light to moderate duty machining. This product contains a synergistic blend of inactive chlorine extreme pressure additives and synthetic esters and will not stain aluminium or yellow metals.
High performance low viscosity neat cutting oil for aluminium and yellow metals
OIL UK NEATCUT ALY-10 is a low viscosity neat cutting oil specifically designed for machining aluminium, low to medium tensile steels, yellow metals and plastics. The product contains special synthetic esters to enhance surface finish and tool-life on difficult to machine materials. Excellent flushing action due to the product’s low viscosity. Neatcut ALY-10 is a high lubricity product with excellent extreme pressure performance.
High performance deep hole drilling, thread rolling, form grinding, honing and general machining fluid
OIL UK NEATCUT GD-10 is a high performance, low viscosity deep-hole drilling fluid manufactured from low aromatic solvent refined mineral oil blended with high levels of extreme pressure additive systems. The product gives superior surface finish and tool-life on ferrous metals. It is not suitable for yellow metals due to the presence of sulphurised additives. NEATCUT GD-10 is suitable for a wide range of multi material applications, including deep hole drilling, thread Rolling, form grinding, honing and general machining as well as blanking and stamping operations where a low viscosity, high EP product is required.
Low viscosity, high lubricity neat cutting oil for aluminium and non-ferrous metals
OIL UK NEATCUT RB-10 is a superior quality low viscosity neat cutting oil based on severely refined mineral oil and synthetic esters providing excellent lubricity. This product is designed to provide excellent performance on aluminium and non-ferrous metals, and the pale colour ensures excellent work piece visibility.
The low viscosity of NEATCUT RB-10 makes it suitable for applications that require good penetration and effective swarf flushing. This makes the product particularly suitable for applications such as reaming and burnishing, but NEATCUT RB-10 is also suitable for general machining on aluminium and non-ferrous metals.
Synthetic biodegradable operator friendly cutting and drawing oils
OIL UK NEATCUT SE 10 and NEATCUT SE 28 are low and medium viscosity synthetic ester based cutting and deep drawing oils. These product provides outstanding lubricity and cutting performance whilst being very low misting and operator friendly.
Neatcut SE-10 and SE-28 are suitable for a wide range of applications such as spray lubrication, stamping, bending, drawing, roll forming as well as machining such as milling, turning and drilling, sawing and tapping.
Medium viscosity general purpose neat cutting oils for Multi-Metal applications
OIL-UK NEATCUT GP 28 is a medium viscosity light coloured neat oil designed for medium to heavy duty machining of ferrous and non-ferrous metals, where enhanced work-piece visibility is preferred. The product contains a synergistic blend of light coloured extreme pressure additives to significantly enhance surface finish and tool-life even on difficult to machine ferrous alloys. The product contains fatty additives to assist lubricity and non-active sulphur extreme pressure components, making it non-staining and therefore also suitable for use on yellow metals.
OIL-UK NEATCUT GP 28 is suitable for grinding, and machining of ferrous and non-ferrous metals including difficult to machine alloys, giving superior surface finish and tool–life. This product has been designed as a medium to heavy-duty general purpose work-shop lubricant.
OIL-UK NEATCUT GP 28 can top-up all common neat metalworking fluids without adverse effect.
A range of low to medium viscosity general purpose neat cutting oils for heavy duty applications
The OIL UK NEATCUT GPX range are low to medium viscosity light coloured neat oils designed for heavy duty machining of ferrous and non-ferrous metals, where enhanced work-piece visibility is preferred. These products contain a synergistic blend of light coloured extreme pressure additives to significantly enhance surface finish and tool-life even on difficult to machine ferrous alloys. Neatcut GPX products contains fatty additives to assist lubricity and non-staining extreme pressure components, making them non-staining. Neatcut GPX grades also contains an anti-mist additive to enhance their health and safety credentials.
High performance low to medium viscosity broaching, tapping, reaming and threading oil
OIL UK NEATCUT BT-22 is a high performance low to medium viscosity neat cutting fluid, suitable for general purpose light, medium and heavy duty machining that is also suitable for tapping, reaming, threading and horizontal and vertical broaching. The product gives superior surface finish and tool-life.
NEATCUT BT-22 is suitable for the machining of ferrous and non-ferrous alloys, including modern aerospace type materials. This product contains a combination of high performance fatty, and non-active sulphurised and chlorinated additives to provide excellent lubricity and extreme pressure properties, making it non-staining and also suitable for yellow metals.
High performance heavy duty neat tapping and threading oil
OIL UK NEATCUT TT-25 is a high performance tapping and threading fluid suitable for all metals. This product contains a synergistic blend of inactive chlorine and sulphur additives to provide excellent extreme pressure properties as well as fatty components to provide high lubricity, superior surface finish and tool-life. Because of the inactive nature of the EP additive components this product is non-staining and is therefore suitable for yellow metals.
Neatcut TT-25 is suitable for tapping and threading of all ferrous and non- ferrous metals and alloys, including modern aerospace type materials, and aluminium alloys.