Industrial

We offer an extensive range of high quality industrial lubricants and greases for use in your business.
This portfolio of Industrial Lubricants is supported by expert service from our Technical Team, to provide you with every reassurance that the correct industrial lubricant is being used and to solve any lubrication-related problem

  • Grease Products

  • We offer an extensive range of greases for use in your business.

    This portfolio of products is supported by expert service from Oil UK  Technical Team, to provide you with every reassurance that the correct grease is being used and to solve any lubrication-related problems.

  • Hydraulic, Bearing & Circulating Oils

  • Turbine Oils

  • A range of supreme performance turbine oil including products specially designed for use in geared and non-geared steam turbines, gas turbines and combined cycle gas turbines (CCGT) and gas turbines operating at high temperatures.

    These products possesses outstanding thermal and oxidation stability, good load carrying capacity, excellent water separability, superior rust and corrosion inhibition, low foaming tendency, good air release properties and resistance to chemical degradation to provide excellent equipment protection, reliable operation, with reduced down-time and extended
    service life.
    Oil UK Turbine Oils exceed the performance requirements of specifications of major gas and steam turbine manufacturers.

    Turbine EP grades have outstanding thermal and oxidation stability that prevents sludge formation, controls deposits and  minimises oil degradation leading to reliable operation. Superior anti-wear property and load carrying capability provide excellent protection for geared turbines. Excellent water separation capability resists formation of emulsion and leads to easy removal of excess water from the lubrication system. Effective rust and corrosion inhibitors provide long term protection to critical system components and good air release properties and foam control avoid erratic operation and pump cavitation leading to trouble free operation.

    These products are recommended for power generation gas turbines, combined cycle gas turbines (CCGT), large heavy-duty industrial gas turbines, power generation and industrial steam turbines and turbines with heavily loaded gears and turbo compressors.
    Available in 200 litre barrels, 20 litre drums and 1,000 litre IBC’s

    • Oil UK Turbine

      • Oil UK Turbine 32

        High quality solvent refined turbine oils
        DIN 51515-1 L-TD, DIN 51524-1 HL, ASTM 943 ASTM 3427 ISO 6743-5 L-TSA / TGA, BS 489, US Army MIL-L-17672 D, US Steel 120
        GEK 32568 A / C, SIEMENS TLV 9013-04, BROWN BOVERI HTGD 90117
      • Oil UK Turbine 46

        High quality solvent refined turbine oils

        DIN 51515-1 L-TD, DIN 51524-1 HL, ASTM 943 & ASTM 3427 ISO 6743-5 L-TSA / TGA, BS 489, US Army MIL-L-17672 D, US Steel
        120 GEK 32568 A / C, SIEMENS TLV 9013-04, BROWN BOVERI HTGD 90117

         

      • Oil UK Turbine 68

        High quality solvent refined turbine oils

        DIN 51515-1 L-TD, DIN 51524-1 HL, ASTM 943 & ASTM 3427 ISO 6743-5 L-TSA / TGA, BS 489, US Army MIL-L-17672 D, US Steel
        120 GEK 32568 A / C, SIEMENS TLV 9013-04, BROWN BOVERI HTGD 90117

         

      • Oil UK Turbine 100

        High quality solvent refined turbine oil

        DIN 51515-1 L-TD, DIN 51524-1 HL, ASTM 943 & ASTM 3427 ISO 6743-5 L-TSA / TGA, BS 489, US Army MIL-L-17672 D, US Steel
        120 GEK 32568 A / C, SIEMENS TLV 9013-04, BROWN BOVERI HTGD 90117

    • OIL UK EP TURBINE OILS

      • Oil UK Turbine EP 32

        High quality heavy duty extreme pressure turbine oils


        ASTM 4304, Type I & Type II, ISO 8086, TSE,TGE,TSA, BS489,DIN51515 Part1, (TD) and Part 2 (TG)GEK 32568E/F, 46506D,28143A,107395a, 101941, Siemens TLV 9013-04, Alstom HTGD 90117 V 0001T & Solar ES 9-224, Class II

      • Oil UK Turbine EP 46

        High quality heavy duty extreme pressure turbine oils

        ASTM 4304, Type I & Type II, ISO 8086, TSE,TGE,TSA, BS489,DIN51515 Part1, (TD) and Part 2 (TG)GEK 32568E/F, 46506D,28143A,107395a, 101941, Siemens TLV 9013-04, Alstom HTGD 90117 V 0001T & Solar ES 9-224, Class II

      • Oil UK TURBINE EP 68

        High quality heavy duty extreme pressure turbine oils

        ASTM 4304, Type I & Type II, ISO 8086, TSE,TGE,TSA, BS489,DIN51515 Part1, (TD) and Part 2 (TG)GEK 32568E/F, 46506D,28143A,107395a, 101941, Siemens TLV 9013-04, Alstom HTGD 90117 V 0001T & Solar ES 9-224, Class II

      • Oil UK Turbine EP 100

        High quality heavy duty extreme pressure turbine oils

        ASTM 4304, Type I & Type II, ISO 8086, TSE,TGE,TSA, BS489,DIN51515 Part1, (TD) and Part 2 (TG)GEK 32568E/F, 46506D,28143A,107395a, 101941, Siemens TLV 9013-04, Alstom HTGD 90117 V 0001T & Solar ES 9-224, Class II

  • Gear Oils – Industrial

  • Oil UK HD GEAR LUBE Oils are high performance extreme pressure gear oils developed for lubrication of heavy duty industrial gears working under severe operating conditions. Oil UK HD GEAR LUBE Oils are blended from high quality base stocks and sulphur-phosphorous type extreme pressure additive system that gives excellent load carrying capability to provide protection against shock loading and wear.

    The high thermo-oxidative stability of Oil UK HD GEAR LUBE Oils helps resist high temperature deposit formation and oil thickening. In addition, Oil UK HD GEAR LUBE Oils also possess excellent water separation characteristics and offer resistance to foaming.

    Oil UK HD GEAR LUBE Oils have excellent load carrying capability protects gears against scuffing and wear and offers long equipment life and reduced maintenance costs. High thermo-oxidative stability helps to resist deposit formation, provides enhanced system cleanliness and enables longer service intervals. Oil UK HD GEAR LUBE Oils provides effective rust and corrosion protection to all gearbox components and the excellent demulsibility properties enables trouble-free operation in conditions encountering water/ moisture.

    Oil UK HD GEAR LUBE Oils are applicable in a wide range of industrial spur, helical, bevel and steel-on-steel worm gears, in heavy-duty industrial enclosed gears operating under heavy or shock loading conditions and requiring extreme pressure performance, in journal and roller contact industrial bearings operating at low speeds and high loads and is suitable for splash, mist and circulating systems.

    Oil UK SYNTHETIC PG Polyglycol based and SY, PolyAlphaOlefin based Gear Oils have outstanding
    load carrying capability and micro-pitting performance protects gears against scuffing and wear leading to enhanced equipment life and reduced maintenance costs. The high viscosity index base stocks provide excellent low temperature fluidity and effective lubrication over a wide temperature range and the superior thermo-oxidative stability provides enhanced system cleanliness and enables longer service intervals

    • Oil UK Mineral Oil Heavy Duty Grades

    • Oil UK Synthetic Gear Oils

      • Oil UK Synthetic Gear Oil PG150

        Synthetic, Polyalkylene Glycol Based, ISO 12925-1 L-CKE,DIN 51517-3 CLP,TEXTRON POWER TRANSMISSION Type G

      • Synthetic Gear Oil PG220

        Synthetic, Polyalkylene Glycol Based, ISO 12925-1 L-CKE,DIN 51517-3 CLP,TEXTRON POWER TRANSMISSION Type G

      • Oil UK Synthetic Gear Oil PG320

        Synthetic, Polyalkylene Glycol Based, ISO 12925-1 L-CKE,DIN 51517-3 CLP,TEXTRON POWER TRANSMISSION Type G

      • Oil UK Synthetic Gear Oil PG460

        Synthetic, Polyalkylene Glycol Based, ISO 12925-1 L-CKE,DIN 51517-3 CLP,TEXTRON POWER TRANSMISSION Type G

      • Oil UK Gear Lube SY 68

        Synthetic, Polyalfaolefin Based, ISO 12925-1 L-CKD, DIN 51517-3 CLP,ANSI/AGMA 9005-E02 US Steel 224, DAVID BROWN S1.53.101

      • Oil UK Gear Lube SY 150

        Synthetic, Polyalfaolefin Based, ISO 12925-1 L-CKD, DIN 51517-3 CLP,ANSI/AGMA 9005-E02 US Steel 224, DAVID BROWN S1.53.101

      • Oil UK Gear Lube SY 220

        Synthetic, Polyalfaolefin Based, ISO 12925-1 L-CKD, DIN 51517-3 CLP,ANSI/AGMA 9005-E02 US Steel 224, DAVID BROWN S1.53.101

      • Oil UK Gear Lube SY 320

        Synthetic, Polyalfaolefin Based, ISO 12925-1 L-CKD, DIN 51517-3 CLP,ANSI/AGMA 9005-E02 US Steel 224, DAVID BROWN S1.53.101

  • Heat Transfer Fluids

  • Oil UK is a leading supplier of high performance heat transfer fluids.We specialise in providing an excellent range of high quality fluids for all types of heat transfer systems. These can be supplied for immediate dispatch anywhere in the UK in bulk, 1,000 litre IBC’s, barrels and drums. We can also supply on a global basis and welcome enquiries from outside of the UK

     

    • Oil UK Flushing Additive Concentrate

      Used at a dosage rate of 5% in used heat transfer fluid prior to changing to new oil, Oil UK Flushing Oil Additive Concentrate has a high solvent action on built up gums and varnishes that can greatly reduce the efficiency of heater coils. These oxidation products are then loosened and held in suspension until the system is drained, improving the efficiency of the system and the life of the new oil.


    • Oil UK THERM 22 & THERM 32

      Highly refined superior quality, long service life products designed for closed, forced circulation systems equipped with expansion tanks with bulk temperatures up to 315°C and peak temperatures up to 370°C.


    • Oil UK THERM LT

      Superior Quality Heat Transfer Fluid with Excellent Low Temperature Performance

      Suitable for Operating Temperatures of -30°C to +250°C

      OIL-UK Therm LT is a high quality mineral oil based thermal fluid, for use primarily in non-pressurised closed liquid-phase heating systems that incorporate both heating and cooling branches. This product has excellent resistance to thermal cracking and chemical oxidation and is non-corrosive and non-toxic. OIL-UK Therm LT has a very low pour point, and therefore provides excellent circulation at low temperatures.

      • Excellent heat transfer properties, which can be maintained over a long period of time.

      • Good resistance against oxidation and excellent low temperature performance characteristics.

      • Does not affect seal materials.

      • Suitable for systems incorporating both heating and cooling branches.


    • OIL UK ULTRA-THERM

      OIL UK ULTRA-THERM is a superior quality, competitively priced synthetic heat transfer fluid with outstanding thermal stability, enabling increased change-out intervals, improved system efficiency and reduced costs.

      ULTRA-THERM delivers substantial performance benefits over standard mineral oil based products such as Shell S2 and BP Transcal N etc. and provides superior protection against the premature oxidative breakdown that reduces oil life and creates the build-up of sludge and varnish deposits which reduce heat transfer efficiency and system safety.

      In continuous high temperature international oil industry tests OIL UK ULTRA-THERM is shown to be up to three times more thermally and oxidative stable than standard mineral oil based heat transfer fluids.

      WHY ULTRA-THERM IS SUPERIOR TO MINERAL OIL BASED HEAT TRANSFER FLUIDS?

      Standard heat transfer oils are based on traditional solvent refined mineral oils which have moderate thermal stability. However ULTRA-THERM is based on synthetic oils which contain high performance saturated cyclic hydrocarbons, and do not contain the aromatic molecules and polar compounds such as sulphur, nitrogen and oxygen present in mineral oils that affect thermal stability.

      This difference in thermal stability is demonstrated clearly in the severe ASTM (American Society for Testing and Materials) tests below which are used by the internationally to determine oxidation and thermal stability.

       

      THE BENEFITS OF ULTRA-THERM ARE COMPREHENSIVE :

      • Substantially better oxidation resistance

      • Superior thermal stability

      • Higher Viscosity Index – reduced “thinning out” at high temperatures

      • Considerably reduced residues at high temperatures

      • Better water separation characteristics

      • Substantially lower volatility

      • Excellent low temperature fluidity

      • Superior purity - Lower toxicity, due to virtual absence of impurities, providing enhanced health and safety

      • Better environmental credentials – twice as biodegradable as mineral oil based products

      • Reduced system corrosion

      • Better performance, but less expensive than other leading competitive fluids.

  • Compressor Oils

  • Lubricants for compressors vary dependant upon the type of compressor e.g.reciprocating, rotary,screw and also the gas being compressed e.g. air, nitrogen and refrigerants etc. The Oil UK  range of Compressor Oils have been designed for a wide range of manufacturer’s specifications and requirements.

    • OIL UK mineral oil based Compressor Oils

      • Compressor HT 32

        The COMPRESSOR HT range of compressor oils are manufactured using carefully selected mineral oils. Inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones and anti-wear to protect all the mechanical parts in a compressor

      • Compressor HT 46

        The COMPRESSOR HT range of compressor oils are manufactured using carefully selected mineral oils. Inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones and anti-wear to protect all the mechanical parts in a compressor

        ISO 6743-3A L-DAA / DAB / DAG / DAH  DIN 51506 VBL / VCL / VDL

      • Compressor HT 68

        The COMPRESSOR HT range of compressor oils are manufactured using carefully selected mineral oils. Inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones and anti-wear to protect all the mechanical parts in a compressor

        ISO 6743-3A L-DAA / DAB / DAG / DAH DIN 51506 VBL / VCL / VDL

      • Compressor HT 100

        The COMPRESSOR HT range of compressor oils are manufactured using carefully selected mineral oils. Inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones and anti-wear to protect all the mechanical parts in a compressor.

        ISO 6743-3A L-DAA / DAB / DAG / DAH DIN 51506 VBL / VCL / VDL

      • Compressor HT 150

        The COMPRESSOR HT range of compressor oils are manufactured using carefully selected mineral oils. Inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones and anti-wear to protect all the mechanical parts in a compressor

        ISO 6743-3A L-DAA / DAB / DAG / DAH  DIN 51506 VBL / VCL / VDL

    • OIL UK SYNTHETIC LONG LIFE COMPRESSOR OILS

      • OIL UK SUPER COMPRESSER OIL 4000

        Ultra-high quality synthetic lubricants for high output screw type compressors. These products have been specially formulated with super performance additive systems to provide 4000 hours of operation under severe operating conditions. They contain high levels of anti-wear, anti-corrosion, hydrolytic stability and thermal and oxidative stability plus excellent demulsification characteristics to protect against water ingress causing abrasive corrosion deposits and staining of copper components. In tests these products display significantly superior thermal stability performance in the highly demanding RPVOT test procedures than competitor products, providing a guarantee of best in class longevity even under difficult operating conditions.

        This product meets or exceeds ISO 6743-3: 2003, ISO-L-DAH, ISO-L-DAG

      • OIL UK SUPER COMPRESSOR OIL 8000

        Ultra-high quality synthetic lubricants for high output screw type compressors. These products have been specially formulated with super performance additive systems to provide 8000 hours of operation under severe operating conditions. They contain high levels of anti-wear, anti-corrosion, hydrolytic stability and thermal and oxidative stability plus excellent demulsification characteristics to protect against water ingress causing abrasive corrosion deposits and staining of copper components. In tests these products display significantly superior thermal stability performance in the highly demanding RPVOT test procedures than competitor products, providing a guarantee of best in class longevity even under difficult operating conditions.

        This Product meets or exceeds ISO-L-DAJ, ISO-L-DAC, ISO-L-DAH and ISO-L-DAG

  • Gas Engine Oils

    • OIL UK GAS ENGINE OIL 15W-40 MA

      Heavy Duty Medium Ash product compatible with the “Non Selective Catalyst Reduction” (NSCR)-type catalysts due to its low  phosphorus level


  • Chain & Conveyor Oils

  • Foodgrade products

  • Oil UK offers a full and comprehensive range of lubricants used by the food processing and related industries.
    These products are developed to be market leading products in both performance and value.
    All the range is approved to H1 by NSF and InS for incidental contact and includes: