Anglo-Max Super LS 5W-30

Description:

OIL UK ANGLO-MAX SUPER LS 5W-30 is a new generation fully synthetic super multigrade engine oil formulated using the latest developments in synthetic technology together with the most up to date advancements in additive chemistry setting new standards in engine oil performance.

ANGLO-MAX SUPER LS 5W-30 has been developed to enable outstanding performance to be provided along with effective emission control and full compatibility with emission control after-treatment systems. Low SAPS (sulphated ash, phosphorus, and sulphur) additive technology ensures optimum performance of emission control equipment including particulate filters, at the same time providing long term emission system protection, ensuring a high level of continuous pollution control thereby minimising environmental damage.

Specifications:

ACEA C3, API SN, VW 504.00/507.00,
BMW LL-04, MB 229.51, Porsche C30

Packaging Available:

1L, 4L, 5L, 20L, 25L, 60L, 200L, 208L, 1000L

Application:

ANGLO-MAX SUPER LS 5W-30 is suitable for both petrol and diesel engines, including turbocharged, and is formulated to meet the performance demands and requirements of the most up to date VW/Audi specifications VW 504.00 and VW 507.00 which encompass high standards of emission control and ultimate engine protection. In addition, ANGLO-MAX SUPER LS 5W-30 is suitable for use in a wide range of passenger cars and light commercial vehicles (including many Honda, Hyundai, Kia, Nissan, Subaru and Toyota).

Note: ANGLO-MAX SUPER LS 5W-30 is backwards compatible with most other VW specifications and you are encouraged to call our technical help line for advice on this issue.

FEATURES AND BENEFITS

  • Latest Volkswagen specification
  • Effective environmental protection
  • Ensures lubricant performance over extended drain intervals
  • Effective fuel efficiency
  • Very high standards of engine cleanliness
  • Exceptional long term anti-wear and oxidation stability
  • Excellent high and low temperature performance
  • Exceptional long term additive response

 TYPICAL PHYSICAL DATA

 Test

 Units

 Test Method

 Typical Properties

 Kinematic Viscosity @ 100°C

 cSt

 ASTM D445

 11.8

 Kinematic Viscosity @ 40°C

 cSt

 ASTM D445

 72.3

 Viscosity Index

 

 ASTM D2270

 160

 Flash Point (Open)

 °C

 ASTM D92

 212

 CCS @ -30°C

 cP

 

 6080

 Total Base Number

 mg KOH/g

 ASTM D2986

 6.00